Crock-Pot CSC046X - FITTING A PLUG (UK AND IRELAND ONLY); Plug Safety and Replacement

English 4
Français/French 9
Deutsch/German 14
Español/Spanish 19
Português/Portuguese 24
Italiano/Italian 29
Nederlands/Dutch 34
Svenska/Swedish 39
Suomi/Finnish 44
Dansk/Danish 49
Norsk/Norwegian 54
Polski/Polish 59
Česky/Czech 64
Slovenčina/Slovakian 69
Magyar/Hungarian 74
Română/Romanian 79
български/Bulgarian 84
Hrvatski/Croatian 89
Ελληνικά/Greek 94
FITTING A PLUG (UK AND IRELAND ONLY)
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed
and replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted.
The appliance must not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply cord
and an appropriate plug fitted as detailed. If you remove the plug it must not be
connected to a 13 amp socket and the plug must be disposed of immediately.
If the terminals in the plug are not marked or if you are unsure about the
installation of the plug please contact a qualified electrician.
Blue
(Neutral)
Brown
(Live)
Fuse
Green/Yellow
(Earth)
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Ensure that the outer sheath of
the cable is firmly held by the cord grip
3A