Need help?Do you have a question about the Crosley C100 and is the answer not in the manual?
General| Type | Belt-drive audio turntable |
|---|---|
| Operation | - |
| Product color | Silver |
| Platter material | Aluminum |
| Turntable speeds | 33 1/3, 45 RPM |
| Adjustable counterweight | Yes |
| Shape | S-shaped tonearm |
| Anti-skating range | 0 - 4 g |
| Line outputs (RCA) | 1 |
| Power supply type | AC |
| AC adapter frequency | 60 Hz |
| AC adapter input voltage | 120 V |
| Power consumption (typical) | 8 W |
| Speaker included | No |
Weight and Dimensions| Depth | 412.75 mm |
|---|---|
| Width | 520.7 mm |
| Height | 203.2 mm |
| Weight | 4535 g |
Automatic standby mode activates after 20 minutes of non-use, reducing power consumption.
Halts record spin after playback finishes or stylus is not in contact for 5 minutes.
Connect wirelessly to playback devices supporting Bluetooth for audio playback.
Avoid direct sunlight, heat, humidity, dust, and vibrations for optimal performance.
Ensure rubber belt is attached and all connections are correct before powering on.
Adapter for playing 7-inch EP vinyl records with large center holes.
Connects to the center spindle, holds records, and spins at a consistent speed.
Holds the turntable platter and records stable and centered.
Indicators on the platter used to visually detail various stages of pitch.
Rotary power switch to turn the main power on or off by rotating clockwise or counterclockwise.
Controls platter motion; press to start, press again to stop.
Connects the stylus to the tonearm and holds the tonearm during non-use.
Switches platter rotation between 33 and 45 RPM, indicated by LEDs.
Adjusts the playback pitch percentage, affecting platter speed.
Applies inward force to tonearm to prevent outward skipping across records.
Used to balance the tonearm and adjust stylus pressure.
Includes RCA output jacks, ground terminal, and phono/line switch for audio connections.
Guide for setting up the turntable, including platter, mat, and cartridge installation.
Detailed steps for connecting lead wires to cartridge terminals and mounting to headshell.
Procedure for balancing the tonearm and setting stylus pressure using the counterweight.
Instructions for cleaning the stylus, dust cover, and cabinet to maintain performance.
Connects to speakers or headphones wirelessly via Bluetooth.
Connects turntable to amplifier or receiver via RCA audio cable.
Switchable output for connecting to either phono or line inputs on audio devices.
Steps to pair the turntable with Bluetooth playback devices.
How to connect to already paired devices and enable Bluetooth function.
Guidance for issues when pairing devices, including incompatible devices.
Step-by-step instructions for powering on, playing a record, and powering off.
Method to temporarily lift the stylus from the record during playback.
Instructions on selecting between 33 and 45 RPM and using pitch control.
Details on power, dimensions, weight, motor, and platter.
Information on tonearm length, tracking error, and cartridge specifications.
Details on BT module, version, output power, and communication range.
Technical data on output levels for different modes and frequency range.
Specifications for THD+N, Maximum Input, and S/N Ratio.
Data on L&R channel separation, wow/flutter, and speed pitch adjustments.
List of items included with the turntable, such as adaptors, cables, and manual.
To Next Page
