Crosley C100 - Specifications; General and Turntable Specifications; Tonearm and Cartridge Details; Bluetooth Specifications

1. GENERAL SECTION:
Power Type Adapter + AC plug
Power Input range AC 100V~240V, 50/60Hz
Power Output DC 12V/0.5A
Power Consumption 2.4W
Standby Power Consumption <0.45W
Dimensions 450 (W) x 350 (D) x 145 (H) mm
Weight 4 Kg (Tentative)
2. STANDARD TEST CONDITION:
Ambient Temperature 23 +/- 2℃
Relative Humidity 65% +/- 5%
NOTE: Measurements can be carried out between 5 ℃ to 35 ℃ and 45% to 85% relative humidity.
3. TURNTABLE SECTION:
Type 2-speed full manual
Motor DC motor
Driving Method Belt drive
Turntable Platter (Plastic) 332mm dia Aluminum
Speeds 33
1
/
3
and 45 rpm
4. TONEARM SECTION:
Type Static balanced S-shaped tonearm with detachable headshell
Effective Arm Length 220 mm
Overhang 10mm
Tracking Error Angle Less than 3 degree
Applicable Cartridge Weight 3.5~8.5g
Anti-skating Range 0-4
Tracking Force Adjustment range 0~4g
High of cue (first track) 8~10.5mm
5. Cartridge Details: Audio-Technica AT95E Phono
Output Voltage 1KHz 5cm/sec: 3.5mV
Channel Balance 1kHz: 2 dB
Channel separation 1kHz: 20dB
Frequency response 20Hz~20kHz
Tracking force range 1.5~2.5g ± 1, (recommended 2.0g)
6. Bluetooth:
BT Module BM880 (Sunitec)
BT Version Bluetooth Ver4.2
Output power Class 2 (0~4dBm, 2.5mW)
Maximum communication Range Approx. 10M
Operating Frequency 2402 to 2480MHz
Modulation Method GFSK、π/4-DQPSK、8DPSK
Compatible BT Profile A2DP
Support Codec SBC, aptX
SPECIFICATIONS