SPECIFICATIONS
GENERAL
Power
supply AC 120V~60Hz
Power consumption 8 Watts
Dimension 450(W) x 350(D) x 145(H) mm
Weight 4.55 Kgs
TURNTABLE
Driving Method Belt driven
Speeds 331/3 and 45RPM
Supplied stylus AT3600L
Stylus Pressure 3.5g
Anti-skate range 0~4
*note: design and specifications are subject to change without notice
INCLUDED IN THE PACKAGE:
1 Turntable platter
2 Slip mat
3 Turntable lid
4 45 RPM adaptor
5 Counterweight
6 Headshell
7 User Manual
Important notes:
1 Do not connect the AC power plug before assembly has been completed.
2 Before turning the power on, make sure once again all the connections settings are correct. Always
turn off the power when connecting or disconnecting.
3 Read this manual carefully before using the unit. Be sure to store the manual in a safe place for
future reference.
4 Do not place the unit in a location where it will be exposed to direct sunlight or near a
heating appliance.
5 Do not place the unit in a location where there is high humidity or a lot of dust.
6 The selected location should be free from vibration and stable. Cartridge may pick up slight
vibrations from the speakers or the floor.
GETTING STARTED
To Next Page
Loading...
