English
9
5. To turn off the Bluetooth connect, press the Bluetooth Pairing Button and the LED
will be red.
Note:
- You can connect up to 8 different Bluetooth devices.
- You can delete all previous connected devices by pressing and holding the Bluetooth
Pairing Button for 10 seconds, and then releasing it.
Pitch Control Adjustment
• When the platter is spinning, observe the bottom set strobe dots on the edge of the
platter. As illuminated by the light coming from the strobe illuminator, if the
appropriate row of strobe dots appears to be stationary, the platter is spinning at
the precise rated speed.
• If the dots appear to be moving to the right, the platter is spinning below rated
speed; if they appear to be moving to the left, the platter is spinning above rated
speed.
Needle Replacement
Removing Needle
To remove needle, hold the sides of the needle and gently pull down in the direction
indicated by the arrow.
To Next Page
Loading...
Need help?
General
