Getting Started
Control Locator
1. TURNTABLE SUSPENSION SCREW
2. CENTER SPINDLE
3. TURNTABLE
4. SPEED SELECT SWITCH
5. TENSION ARM
6. TONE ARM
7. SIZE SELECT SWITCH
8. TONE ARM REST
9. TURNTABLE SWITCH
10. TONE CONTROL
11. ON/OFF VOLUME KNOB
12. AC POWER CORD
4
Getting Started
Unpacking
1 Remove packing materials from unit.
Note: Save all packing materials.
2 Remove plastic bag covering unit.
3 Remove plastic safety cover from A/C power
cord(12).
4 Remove tie from A/C power cord.
5 Open lid and remove styrofoam shipping
material from turntable.
6 Remove black tie-wrap from under the tone
arm.
7 Using your Fingers,Turn the Turntable
Suspension Screw (1) clockwise until it is all
the way down. Do not force it. This allows
turntable to float on its shock absorbers.
8 Gently pull out the rubber shipping pads.
5
Power Source
2
3
4
6
7
8
9
1
5
OFF
12
10
7
ON
AUTO
33 45 78
10
11
12
AC
Polarized Plug
1
Unwind the AC POWER CORD (12) at the back
of the unit and connect it to a power outlet.
2 Plug A/C cord into appropriate outlet.
3 This product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature, If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact you electrician to
replace your obsolete outlet. Do not defeat the
purpose of the polarized plug.
To Previous Page
Loading...
Need help?
General
