To Next Page

To Previous Page

English

Initial Setup

Essential Setup

1. Place the unit on a flat and level surface. The selected location should be

stable and free from vibration.

2. Connect AC adaptor to the Power Jack of the unit.

3. Connect the supplied FM wire antenna to the ANT. socket on the unit.

4. Untie the FM Antenna and allow it to hang in a straight line.

Clock Setup

Set the Clock

Manually setting the clock can only be done in STANDBY mode.

1. In STANDBY mode, press and hold the CLOCK button on the remote control.

2. Press the buttons on the remote control to adjust between the 12 or 24

hour setting. Press CLOCK button on the remote control to confirm, and then

the hour digits will flash.

3. Press the buttons on the remote control or on the unit to adjust the

hour digits while flashing. Press CLOCK button on the remote control to

confirm, and then the minute digits will flash.

4. Press the buttons on the remote control or on the unit to adjust the

minute digits while flashing. Press the CLOCK button on the remote control to

confirm.

Note: Unplugging the unit will reset the clock.

Setting the Alarm

1. In Standby mode, press and hold the Timer/Sleep button on the remote

control until the hour digits flash on the display.

2. Press the buttons on the remote control or on the unit to adjust the

hour digits, and then press the Timer/Sleep button on the remote control to

confirm, the minute digits will flash on the display.

3. Press the buttons on the remote control or on the unit to adjust the

minute digits, and then press the Timer/Sleep button on the remote control to

confirm, the mode will flash on the display.

4. Press the buttons on the remote control or on the unit to select:

- FM (to wake to your selected FM Radio Station)

- CD (to wake to your disc music)

5. Press the Timer/Sleep button on the remote control to confirm, the display will

show the volume level.

6. Press the buttons on the remote control or on the unit to adjust the

volume, and press the Timer/Sleep button on the remote control to confirm.

Crosley CR3502A User Manual

Questions and Answers: