English
7
Activate and Deactivate the Alarm
- Press the Timer/Sleep button on the remote control to view the alarm settings
or deactivate the alarm.
- To deactivate the alarm, press the Timer/Sleep one time.
- To activate the alarm, press the Timer/Sleep one time.
Radio Operation
Tuning in a Station
Tune in radio stations automatically
- Press and hold the Tun – /Tun + buttons, the frequency changes down or up
automatically until a station is found.
Tune in radio stations manually
- Press the Tun – /Tun + buttons repeatedly until you find the station you want.
Note: The unit is equipped with a FM wire antenna. To FM improve reception, move the
wire around until the reception is clear without interferences. Do not connect the wire to
any additional antenna.
Auto Scan and Save Preset Station
Press and hold the Auto/Stop button on the remote control to activate automatic
programming. All available stations are programmed in the order of waveband
reception strength.
Presetting Stations Manually
You can preset up to 30 FM stations.
1. Tune in the desired station, then press the Program button on the remote.
2. Press the buttons on the remote control select the preset number.
3. Press the Program button to store the station.
4. Repeat above steps 1 to 3 for each station you want to store in memory with
a preset number.
To Next Page
Loading...
General