English
8
Troubleshooting
There is no power
• Power adaptor is not connected correctly.
• No power at the power outlet.
• To help save power consumption, some models will comply with ERP energy
saving standard. When there is no audio input for 20 minutes, their powers
will automatically cut-off. To turn power back on and resume playing, turn off
the power and turn it on again.
Power is on, but the platter does not turn
• Turntable mode is not selected.
• Turntable’s drive belt has slipped off.
Turntable is spinning, but there is no sound or sound not loud enough
• Stylus protector is still on.
• The input gain of the amplified speaker or similar device may be too low.
Bluetooth is not functioning when it is under Bluetooth mode
• An auxiliary cable is plugged into the Aux In jack, unplug it.
To Next Page
Loading...
Need help?
General