English
7
Needle Replacement
Removing Needle
1. Gently pull down the front edge of the needle.
2. Pull needle forward.
3. Pull out and remove.
Installing Needle
1. Position the needle with its tip facing down.
2. Line up the back of the needle with the cartridge.
3. Insert the needle with its front end at a downward angle and gently lift the
front of the needle upward until it snaps into place.
Bluetooth Streaming Operation
1. Turn on the Bluetooth mode of the Bluetooth speaker and prepare it for
pairing. Please read the user manual of the speaker for detailed instructions if
needed.
2. Press the Bluetooth Button on the back of the unit. The Bluetooth Indicator
will begin to flash quickly. If the speaker was pre-registered in the past, the
turntable will connect to the speaker automatically during this stage.
3. Once the turntable and the speaker are paired, the Bluetooth Indicator will
stay on.
4. Play the record and enjoy the music.
5. To turn off the Bluetooth streaming feature, press the Bluetooth Button.
Note:
Bluetooth version - 4.1
1. When the unit is not connected to a Bluetooth speaker; the Bluetooth Indicator light
will flash slowly.
To Next Page
Loading...
Need help?
General