The system support deleting previous recorded
MP3 or existing files.
1 In USB or SD card playback mode, press and
hold REC/ERASE /
for 2 seconds, current
playback track is stopped and will be deleted.
2 Message “ delete “ is displayed
Delete MP3 tracks
From CD TO USB/SD
The system is capable to convert whole CD disc to
MP3 format and copy to USB mass storage device
or SD card. And also have the ability to copy one
single MP3 track to and from on USB/SD card.
1 In CD playback mode, press REC / to start
ripping to USB/SD card (default USB if both
device are detected), playback will be stopped
and skipped back to the beginning of current
track, system will scan the contents of USB/SD
card and create folder to store MP3 track.
Resume CD playback and start ripping from the
moment. The corresponding target device icon
“ USB ” / “ CARD “ start flashing.
2 Press STOP/BAND / to exit CD ripping.
From LINE IN To USB/SD
2 11
USB/SD Operation
The system is capable to convert audio signal from
LINE IN input to MP3 format and store in USB
mass storage device or SD card (default USB if
both devices are detected).
1 Press FUNCTION / once or more to select
LINE IN
2 Press REC / to start ripping, the system will
scan the contents of USB / SD card and create
folder to store MP3 track.
3 Icon “REC” and message “ RIPP TO “ are
displayed.
2 Press REC / to start ripping, the system will
scan the contents of USB/SD card and create
folder to store MP3 tracks.
3 Icon “ REC ” and message “ RIPP TO” are
displayed, icon “ PHONO “ start flashing.
4 The target device icon “ USB ” or “ CARD ”
start flashing as ripping begins.
5 Press STOP/BAND / to exit PHONO ripping
4 The target device icon “ USB “ or “ CARD “
start flashing as ripping begins.
5 Press STOP/BAND / to exit LINE IN ripping
Note: The message “ NO FUNCT “ will be displayed
if any key pressed during LINE IN ripping process.
The message “ NO DEV “ will be shown if neither
USB or SD card not detected. The message “FULL
“ will be displayed if not enough memory in target
device.
1 In CD-MP3, USB or SD card playback mode,
press REC /
to start MP3 copying from CD
to USB/SD card, or USB to SD card or vice
versa. Playback will be stopped and system will
scan the contents of USB/SD card and create
folder to store MP3 track.
2 icon “ REC displayed
3 Message COPY 01 will be displayed, the
proportional copied percentage will be shown
on the decimal number.
4 The target device icon “USB” or “CARD” start
flashing, the decimal number will be increment
from 01 as MP3 copying starts, the process will
stop as it reach 100
5 Current MP3 will be playback from beginning
Control Locators
CUE LEVER
TONE ARM
SPEED CONTROL SWITCH
(33 1/3,45,78 RPM)
ARM REST
SECURITY HOOK
ADAPTER FOR 45 RPM RECORDS
SPINDLE
TURNTABLE
SPEAKERS
SD CARD
STAND BY
INDICATOR
SENSOR
LCD DISPLAY
VOLUME
UP/DOWN KNOB
USB PORT
FUNCTION
PLAY / PAUSE
STOP / BAND
PROG / CLOCK
HEADPHONE JACK
REC / ERASE
TIMER
CD DOOR
POWER
CD OPEN/CLOSE
REPEAT/STEREO
PRESET -
PRESET +
UP / FF
DOWN / FB
LINE IN JACK
MP3 Copying
To Next Page
Loading...
Need help?
General