EasyManuals Logo

Crosley ZDM6502AS Installation Instructions

Crosley ZDM6502AS
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Do Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
Reposition Dishwasher
by Grasping Both
Sides With Hands
STEP 9 POSITION DISHWASHER UNDER COUNTERTOP
Check to be sure that wires are secure under the
dishwasher and not pinched or in contact with door
springs or other dishwasher components.
TIP: Check tub insulation blanket, if equipped. It should
be positioned so it is not bunched up or interfering with
door springs. Check by opening and closing the door.
Push dishwasher into cabinet. The front corners of the
dishwasher door should be fl ush with cabinet doors.
Be careful not to dent font panel with knees or dam-
age countertop or cabinets with dishwasher parts.
Installation Instructions
STEP 10 LEVEL DISHWASHER
IMPORTANT
Dishwasher must
be level for proper dish rack operation and wash perfor-
mance.
TIP: Pull lower rack out, about halfway. Check to
be sure the rack does not roll forward or back into
dishwasher. If the rack rolls in either direction, the dish-
washer must be leveled again.
If door hits the tub, the dishwasher is not installed
correctly. Adjust leveling legs to align door to tub.
Level the dishwasher
by adjusting the four
leveling legs individu-
ally.
Place level on
door and rack
track inside the
tub as shown to
check that the
dishwasher is
level.
Check
Level
Side
To Side
Check
Level
Front
to Back
Turn Legs
to Adjust
8

Other manuals for Crosley ZDM6502AS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Crosley ZDM6502AS and is the answer not in the manual?

Crosley ZDM6502AS Specifications

General IconGeneral
BrandCrosley
ModelZDM6502AS
CategoryDishwasher
LanguageEnglish

Related product manuals