EasyManuals Logo

Crowcon Tetra User Manual

Crowcon Tetra
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
(see example). In Run mode, the battery icon will display six bars when
it is full.
4. Remove the lead from the charging socket and replace the protective
cover.
3.2 Non-rechargeable batteries
Tetra uses a three AA alkaline battery pack which will give 11 hours operating
time. The following battery types are suitable for the non-rechargeable version:
Energizer type LR6 MN1500
Gold Peak type 15A LR6
Duracell type MN1500 LR6
Varta type 4006
Alkaline batteries will typically last 11 hours.
To replace the battery pack, ensure you are in a safe, non-hazardous area. The
battery pack is located in the bottom of the instrument. Remove the access
cover and withdraw the battery pack. Replace the 3 x AA cells, then reinsert the
pack into the instrument and replace and securely fasten the access cover.
13
Tetra Batteries

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Crowcon Tetra and is the answer not in the manual?

Crowcon Tetra Specifications

General IconGeneral
Operating Temperature-20°C to +50°C
TypePortable Gas Detector
Gases DetectedOxygen, Carbon Monoxide, Hydrogen Sulfide
DisplayLCD
Ingress ProtectionIP65
Sensor TypesElectrochemical

Related product manuals