To Next PageTo Next Page
Need help?Do you have a question about the Crown Boiler BSI172 and is the answer not in the manual?
Details minimum clearances for boiler installation around all sides and top.
Procedures for providing combustion air in confined boiler rooms.
Guidelines for air supply in buildings with tight construction methods.
Lists approved chimney types and vent connectors for boiler installation.
Steps for safely removing a boiler from a common chimney system.
Instructions for installing safety valve, drain valve, and connecting system supply/return.
Wiring procedures for feeders with specific low water cut-off models.
Field wiring instructions for connecting an indirect water heater to the boiler.
Detailed operation sequence for boilers with a standing pilot ignition system.
Detailed operation sequence for boilers with an intermittent ignition system.
Step-by-step guide for lighting the pilot burner on standing pilot models.
Lighting procedures for standing pilot boilers with Robertshaw gas valves.
Lighting procedures for intermittent pilot boilers with Honeywell gas valves.
Lighting procedures for intermittent pilot boilers with Robertshaw gas valves.
Outlines maintenance tasks on continuous, weekly, and annual schedules.
Detailed steps for cleaning the boiler's heat exchanger and flue passages.
Steps to diagnose issues with the standing pilot ignition system.
Steps to diagnose issues with the intermittent ignition system.
Steps for preparing the boiler's base assembly before installation.
Procedures for installing the heat exchanger and flue collector.
Detailed instructions for making electrical connections to the boiler controls.
General| Model | BSI172 |
|---|---|
| Fuel Type | Natural Gas or Propane |
| Input BTU | 172, 000 |
| Type | Gas Boiler |
| Boiler Type | Hot Water |
