P.I.P.–AMCb
Page 17
4. Tighten the two PIP mounting
thumbscrews.
5. Connect input and output wiring as
described in the preceding section
(Input/Output Wiring).
6. Plug in the amplifier and turn it on.
Adjust its level controls to a desired
setting. (In Dual mode, the level
controls can now be used to bal-
ance the low and high frequencies.)
Do not tamper with the circuitry. Circuit
changes made by unauthorized per-
sonnel, or unauthorized circuit modifi-
cations are not allowed.
Remember:Remember:
Remember:Remember:
Remember: Crown is not liable for
any damage resulting from overdriv-
ing other components in your sound
system.
To Next Page
Loading...
