INSTALLATION AND OPERATION MANUAL, ELECTRIC COUNTER CONVECTION
STEAMER, MODELS: SX-3, SX-5
PART NUMBER 10080R5 9 2007-01-02
ELECTRICAL CONNECTIONS
WARNING: Disconnect electrical power supply and place a tag at
the disconnect switch to indicate that you are working on the circuit.
Electrical grounding must be provided in accordance with local codes or in the absence of local
codes, with the National Electrical Code, ANSI/NFPA70, or the Canadian Electrical Code, CSA
C22-2, as applicable.
Use copper wire suitable for at least 200 degrees Fahrenheit (90 degrees Celsius). The
steamer must be grounded. The wiring diagram is located on the right side panel as you face
the steamer.
To Next Page
Loading...