Croydex Flexi-Fix 1919 User Manual

FLEXI-FIX WALL MOUNTED MIRROR
SAFETY AND CARE
1. Always take care when using power tools, particularly if there is
any water in the working area.
2. Always check for hidden cables and pipework before drilling
and take extreme care if there is any water in the working area.
3. Always use a residual current circuit breaker (RCCB/GFCI).
4. Always wear suitable eye protection when drilling.
5. When drilling into a tiled surface do not use a hammer drill.
6. Always use a drill bit that is suitable for the surface that is
being drilled.
7. The wall plugs supplied are for use on solid walls only. For cavity
walls or plasterboard use specialist fixings that are suitable for
the type of wall construction.
8. To retain the best quality finish, clean product regularly with a
soft damp cloth.
9. Do not use abrasive or chemical cleaners, as these may
damage the product.
10. Redecoration may be required on some painted surfaces after
removal.
12. Do not position glass products directly above a heat source.
x1
FIXING PACK CONTENTS
x4
x4
x2
x1x2
6mm
15
/
64
”

Croydex Flexi-Fix 1919 Specifications

General

Brand	Croydex
Model	Flexi-Fix 1919
Category	Indoor Furnishing
Language	English

Summary

Safety and Care Instructions

Power Tool Safety

Exercise caution with power tools, especially in wet areas.

Pre-Drilling Checks

Verify for hidden cables/pipework before drilling and be cautious if water is present.

Electrical Safety

Always use a residual current circuit breaker (RCCB/GFCI).

Eye Protection

Wear suitable eye protection when drilling.

Drilling on Tiles

Do not use a hammer drill when drilling into a tiled surface.

Drill Bit Selection

Use a drill bit appropriate for the surface being drilled.

Wall Plug Usage

Supplied wall plugs are for solid walls; use specialist fixings for cavity walls/plasterboard.

Cleaning and Maintenance

Clean regularly with a soft damp cloth to maintain finish.

Chemical Cleaner Warning

Avoid abrasive or chemical cleaners to prevent product damage.

Heat Source Proximity

Do not position glass products directly above a heat source.

Fixing Pack Contents

Installation Steps