EasyManua.ls Logo

Croydex SIMPLICITY WC257222 User Manual

Croydex SIMPLICITY WC257222
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Thank you for purchasing this Croydex product. Please follow the fixing and care instructions to ensure
that your bathroom product is fitted safely and that it retains its high quality finish. Please retain this
leaflet for future reference.
This instruction leaflet applies to the following product:
WC257222 (White) Single Door Corner Cabinet
Fixing Pack Contents
(a) 14 x Fixing screws
(b) 1 x Magnetic catch
(c) 2 x Magnetic catch screws
(d) 2 x Mirrored door pivot pins
(e) 16 x Screw caps
(f) 1 x Glue sachet
(g) 3 x Shelf supports
(h) 2 x Wall fixing screws
(i) 2 x Wall plugs
(j) 2 x Washers
(k) 1 x Magnetic plate
(l) 1 x Magnetic plate screw
(m) 2 x Pivot pin bush
Tools Required
Drill; 6mm Masonry Drill Bit; 6mm Ceramic Drill Bit (optional); Cross Head Screwdriver; Large Flat Head
Screwdriver; Bradawl; Pencil, Spirit Level.
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Home Safety Advice
It is recommended that two people fit the cabinet to ensure that it is fitted safely.
Always take care when using an electric drill, particularly in the bathroom. Always check for
hidden cables and pipe work before drilling and take extreme care if there is any water in the
working area.
It is advisable to use a residual current circuit breaker (RCCB).
Always wear suitable eye protection when drilling.
If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used. Always
ensure that the drill hole passes through the central tiled area rather than through the grouted
area. To prevent unnecessary damage to the tile, mask the area around the hole with tape
before drilling.
Do not strike the product with hard or sharp objects.
Do not overload the cabinet. Maximum safe working load is 10kg evenly distributed if mounted
on to a solid wall. If mounted on to a cavity wall reduce the load to 5kg evenly distributed.
Component Key
(a) Mirrored Door, (b) Backing Board, (c) Backing Board, (d) Side Panel, (e) Side Panel, (f) Back Panel,
(g) Top Panel, (h) Base Panel, (i) Strengthening Baton, (j) Strengthening Baton, (k) Shelf.
(m)
Question and Answer IconNeed help?

Do you have a question about the Croydex SIMPLICITY WC257222 and is the answer not in the manual?

Croydex SIMPLICITY WC257222 Specifications

General IconGeneral
Product NameCroydex SIMPLICITY WC257222
CategoryIndoor Furnishing
TypeToilet Seat
MaterialMDF
FinishWhite
FeaturesSoft Close
Mounting TypeTop Mount

Summary

Fixing Pack Contents

Tools Required

Home Safety Advice

Component Key

Assembly Instructions

Step 1: Mount Door Catch

Instructions for mounting the magnetic door catch and plate.

Step 2: Secure Side Panel

Securing the side panel to the base panel using fixing screws.

Step 3: Secure Side & Back Panels

Securing side and back panels to the base panel with fixing screws.

Step 4: Locate Backing Boards

Positioning and screwing backing boards into the cabinet.

Step 5: Install Strengthening Batons

Sliding strengthening batons into rear cabinet channels.

Step 6: Fit Door Pivot Pins

Placing door pivot pins and bushes into the base and top of the door.

Step 7: Attach Top Panel

Securing the top panel to the cabinet carcase.

Step 8: Secure Hanging Batons

Sliding and securing hanging batons to the top panel.

Step 9: Wall Mounting

Marking, drilling, and securing the cabinet to the wall.

Step 10: Insert Shelf

Inserting shelf supports and placing the shelf into the cabinet.

Product Care

Related product manuals