Need help?Do you have a question about the Cruisair SMXht and is the answer not in the manual?
Details the buttons, indicators, and displays for SMXIIAB and SMXir keypad/displays.
Covers turning the system on/off, selecting Cool, Heat, Auto modes, and setting the desired temperature.
Instructions for entering, navigating, and exiting the SMX II programming mode.
Programming the compressor time delay and selecting Fahrenheit or Celsius display.
Adjusting settings for compressor restarts and fan speed changes based on temperature differences.
Explains system safeguards, fault codes, and how fault displays are cancelled.
Details on high-pressure and low-pressure shutdowns, including their causes and behavior.
Covers low-voltage protection, software errors (PE message), and their resolution.
How to turn on/off, select modes, adjust setpoint, and manage display brightness on SMXht.
Procedures for resetting SMXht to factory defaults and understanding fault code displays.
General| Display | LCD |
|---|---|
| Control Method | Digital |
| Weight | 0.5 lbs |
| Compatibility | Cruisair systems |
| Humidity Range | 0-100% RH |
To Next Page
