Need help?Do you have a question about the Crunch Ground Pounder GPV1000.2 and is the answer not in the manual?
Discusses system design principles for successful car audio installations.
Covers physical mounting and wiring practices for amplifiers.
Details proper gauge wire selection and connection for power and ground.
Outlines the recommended order for connecting cables to prevent shorts.
Provides a step-by-step guide for safely powering on the amplifier for the first time.
General features and capabilities of the Ground Pounder GPV amplifier series.
Detailed features and control descriptions for 2-channel models.
Detailed features and control descriptions for 4-channel models.
Features and controls for the 1-channel A/B class mono amplifier.
Features and controls for the 1-channel D class mono amplifier.
Illustrates basic stereo wiring for full-range sound with 2-channel amplifiers.
Details basic mono bridging for 2-channel amplifiers using a Y-adapter.
Guide for setting up a 2-way active system using two 2-channel amplifiers.
Configuring a 4-channel amplifier for discrete full-range operation.
Using 4-channel amps for 2 or 3-channel systems via mono bridging.
Setting up a 2-way active system using a 4-channel amp for highs and bass.
Using front/rear outputs for a 2-way system with fade control.
Illustrates connecting the GPV2000.1 for basic mono subwoofer use.
Steps for installing a single GPV3000.1D PRO for mono subwoofer output.
Procedure for installing and linking two GPV3000.1D PRO amps for increased power.
Guides for setting High Pass, Bass EQ, Low Pass, and Level controls on 2/4 channel amps.
Guides for setting Subsonic, Bass EQ, Low Pass, Phase, and Level on mono amps.
Diagnosing amplifier shutdown due to short circuits, DC faults, or overheating.
Resolving problems with low power, blown fuses, and system not turning on.
Identifying and fixing hiss, electrical interference, ticking, and constant whine.
General| Channels | 2 |
|---|---|
| Speaker Level Inputs | Yes |
| Preamp Outputs | Yes |
| Built-in Crossover | Yes |
| Total RMS Power Output | 1000 Watts |
| Input Sensitivity | 0.2V - 6V |
To Next Page