Specifications
9. System I/O Port
A DB15 female socket that can be used to remotely control the helium compressor package
and monitor a limited number of its parameters.
10. Cold Head Motor Connector
The electrical connection for the cold head motor cord, from the helium compressor package
to the cold head or remote motor assembly.
11. Main Circuit Breaker
Provides over-current protection for the helium compressor package and functions as a power
disconnect.
12. Power Cord
Electrical connection that supplies power to the system.
13. Cooling Water Inlet Connection
A 3/8 FPT (Female National Pipe Thread) fitting used to provide coolant to the helium
compressor package.
14. Cooling Water Outlet Connection
A 3/8 FPT (Female National Pipe Thread) fitting used as an exit for the coolant from the helium
compressor package.
15. Touch Screen
Displays system status, warnings, error messages, operation data, system information and
allows users to interact with the helium compressor package.
16. COM Ports
Used for remote monitoring and control of the system via SMDP or Modbus RTU protocol.
To Next Page
Loading...