Why is my Crystal Mountain Water Dispenser not dispensing cold water?
If your Crystal Mountain Water Dispenser isn't dispensing cold water, you should check the cold control. Allow sufficient time for the water to be refrigerated before dispensing. Ensure adequate condenser air circulation by placing the cooler at least 4 inches (10 cm) from the wall. Also, check the baffle and reinstall it if necessary.
Why is my Crystal Mountain Water Dispenser not dispensing hot water?
If your Crystal Mountain Water Dispenser is not dispensing hot water, allow sufficient time for the water to be heated before dispensing. Ensure that the hot water switch is in the “ON” position. Also, check the wires and connectors, heat limiter, and thermostat.
What to do if my Crystal Mountain Water Dispenser has no cold or hot water?
If your Crystal Mountain Water Dispenser has no cold or hot water, verify that the cooler is plugged in and the hot tank switch is turned on. Check to ensure there is water in the bottle. Check the operation of the faucets.
What to do if my Crystal Mountain ASPEN is leaking?
If your Crystal Mountain Water Dispenser is leaking, first, check that the cold water tank isn't overfilled. Next, inspect the bottle for any leaks. Also, check the hot water drain cap and look for loose faucets or damaged faucet gaskets.
How to fix a noisy Crystal Mountain Water Dispenser?
To address a noisy Crystal Mountain Water Dispenser, ensure that the cooler is placed on a flat surface. Move the cooler away from other appliances. Check for any vibration at the refrigeration line.
General| Type | Water Dispenser |
|---|---|
| Material | Plastic |
| Color | White |
| Power Consumption | 500W |
| Water Temperature | Hot and Cold |
To Next Page
