Need help?Do you have a question about the Crystal Mountain K2 and is the answer not in the manual?
General| Available Water Options | Hot, Cold, Room Temperature |
|---|---|
| Filtration | No |
| Hot Water Temperature | 185°F |
| Voltage | 110-120V |
| Color | White |
| Type | Water Dispenser |
| Cooling Technology | Compressor Cooling |
| Cabinet Material | Plastic |
| Capacity | 5 Gallon Bottle |
Describes the status lights for power, heating, and water temperature.
Operation of cold and hot/cook water levers and water outlets.
Includes light sensor, hot water activation switch, and dispense area lighting.
Covers drip tray and cup dispenser features.
Instructions for inspecting the cooler for shipping damage upon arrival.
Steps to attach the base plate to the cooler unit.
Guidelines for placing the water cooler in a suitable indoor location.
Instructions for connecting the dispenser to a power supply.
Process to fill the hot and cold water tanks for initial setup.
How to turn on the hot water heating function.
How to dispense cold water and expected temperature range.
How to dispense hot water and expected temperature range.
Instructions for cleaning the exterior surfaces using mild detergent and a soft cloth.
Steps for removing the water filter cartridge from the cooler.
Steps for installing the new filter, closing the unit, and priming the system.
Common issues and solutions for water leaks from the dispenser.
Troubleshooting steps when water fails to dispense.
Diagnosing and resolving issues with cold water not being dispensed.
Troubleshooting steps for the absence of hot water.
Potential causes and solutions for unusual noises from the dispenser.
Instructions for proper installation, placement, and intended use of the dispenser.
Warnings and guidelines regarding power connection, extension cords, and grounding.
Precautions for children, persons with reduced capabilities, and general caution.
To Next Page
