Remark: - Pl refer to programming / user section to activate these function's
Caution: - All System Programming can be done only in Main Password mode from any Extn. in
tone / DTMF mode at the site.
Function Summary
No. Function User code Flexible plan Remark
1 Intercom Call 21,22,23,24,25,26.......34 Yes (1 to 3 digit)
2 Junction No. Access 61,62,63,64 or 0/*5 Yes (1 to 3 digit) System Program
3 Last No. Redial Dial # No
4 Answer/ Receive Call See User Function
5 Call Hold & Retrieve See User Function
6 Call Consult See User Function
7A Call pickup *4 Yes
7B Selective call pickup *76+extn.no. Yes
8 Call transfer Flash + Extn. No. No
9 NoCLI See User Function
10 Auto call Back(extn/jn) Dial 75 No
11 Do not Disturb *721+Self Extn. No. Yes User Program
DND cancel *720 Yes
12 Call Forward *721+Extn. No. Yes
Call Forward cancel *720 Yes
13 Barge in Dial 83 No System Program
14 Call toggle Flash + 1 No
15 Monitor Dial 80 No System Program
16 Conference (3 Party) Flash + 0 No System Program
17 Day/Night Mode *85+1/2/3 (Day/Night/Auto ) Yes System / User Program
18 Flash Time See User Function
19A Dynamic Lock *81+ self PW Yes System / User Program
B Dynamic Lock OPEN *82+ self PW Yes
C Dynamic Lock PW change *86+Old PW+New PW Yes
20 Hot line (Extn./Jn.) *16+1+ Extn / Jn Yes System / User Program
21 Hot line Fun./cancel *16+0 Yes
22 Alarm *98+ 2 (one time) /3,4,5 (repeat) Yes User Program
23 Relay Port *16+ 5 (On) / 6 (Off) / 7 (click) Yes System Program
24 Paging *87+1 Yes System / User
Program
25 Trunk Reservation *112 Yes System Program
26 Emergency dial *99 Yes System Program
27 FND Access 21/22/23/24
28 Global Dial *88 + 00 to 99 Yes System Program
Inspire 104/206/308/414 User Guide
3
To Next Page
Loading...