CSL 450 - LED function; Initial use

18
English
5 LED funcon
6 Inial use
Remove the headset from the packing and charge it fully before using
it for the rst me. To do this, connect the provided charging cable to
the headset. The charging socket is located below the right bracket. For
example, a computer or a USB charging adapter can be used for charging.
The baery is fully charged once the LED indicator changes from red to
blue. Always disconnect the headset from the power source aer charg-
ing it to prevent constant recharging. It is advisable to use the headset
regularly to maintain the full performance of the integrated baeries.
The 3.5 mm jack can be used when the headset is switched-on as well
Switching on Blue LED ashes 2 mes
Switching o Red LED ashes 2 mes
Pairing Red and blue LEDs ash alternately
Standby Blue LED ashes 3 mes in 5 seconds
Incoming call Blue LED glows connuously
Low baery status Red LED ashes 2 mes every 2 seconds
Charging Red LED glows connuously If the device is
fully charged, then the blue LED ashed once.