To Next Page

To Previous Page

PERFORMING A SITE SURVEY

MULTI NETWORK SURVEY

1. Select the Cellular icon on the home screen

2. Select the Multi Network icon

3. Choose either 2G, 3G, 4G or all technologies (for the 2G variant the technology will be limited to

2G only)

4. Select the Start icon for the survey to begin. If you wish to name the survey before you start

select the Name Survey icon , name your survey

and press Go

5. A Survey Progress bar will then display the status of your survey. The survey should take

2-3 minutes

6. Once the survey has been completed the results will be available

SINGLE NETWORK SURVEY

1. Select the Cellular icon on the home screen

2. Now select Single Network icon

3. Choose either 2G, 3G, 4G or all technologies (for the 2G variant the technology will be limited to 2G

only)

4. Select the required network (if you can’t see your preferred network press refresh so that the unit

locates all available networks in the area). You can also select Any Network option which allows the

radio module to decide which is best for your location.

Refreshing networks may take 2-3 minutes

5. Select the Start icon

for the survey to begin. If you wish to name the survey before you start

select the Name Survey Icon

, name your survey and press Go

6. A survey progess bar will then display showing the progress of the survey. The survey should take

2-3 minutes

7. Once the survey has been completed the results will be available

CSL CS2369 User Manual

Questions and Answers: