All-In-One ESS Energy Storage System
This product is a Lithium Iron Phosphate Battery with certified compliance under the UN
Recommendations on Transport of Dangerous Goods, Manual of Tests and Criteria, Part III,
subsection 38.3. For the battery cell, chemical materials are stored in a hermetically sealed metal
case, designed to withstand temperatures and pressures encountered during normal use. As a
result, during normal use, there is no physical danger of ignition or explosion and chemical danger
of hazardous materials' leakage. However, if the product is exposed to a fire, added mechanical
shocks, decomposed,added electric stress by misuse, the gas release vent will be operated. The
battery cell case will be breached at the extreme. Hazardous materials may be released.
Moreover, if heated strongly by the surrounding fire, acrid or harmful fume may be emitted.
1.4.2 Safety Datasheet
For detailed information please refer to the provided battery safety datasheet.
1.5 General Precautions
DANGER
Danger to life due to high voltages of the PV array, battery and electric shock. When exposed to
sunlight, the PV array generates dangerous DC voltage which will be present in the DC conductors
and the live
components of the inverter. Touching the DC conductors or the live components can lead to lethal
electric shocks. If you disconnect the DC connectors from the system under load, an electric arc
may occur leading to electric shock and burns.
◆Do not touch uninsulated cable ends.
◆Do not touch the DC conductors.
◆Do not open the inverter and battery.
◆Do not wipe the system with damp cloth.
◆Have the system installed and commissioned by qualified people with the appropriate skills only.
◆Prior to performing any work on the inverter or the battery pack, disconnect the inverter from all
voltage sources as described in this document.
WARNING
Risk of chemical burns from electrolyte or toxic gases. During standard operation, no electrolyte shall
leak from the battery pack and no toxic gases shall form. Despite careful construction, if the Battery
Pack is damaged or a fault occurs, it is possible that electrolyte may be leaked or toxic gases formed.
◆Do not install the system in any environment of temperature below -10°C or over 50°C and in
which humidity is over 90%.
◆Do not touch the system with wet hands.
◆Do not put any heavy objects on top of the system.Do not damage the system with sharp objects.
◆Do not install or operate the system in potentially explosive atmospheres or areas of high humidity.
◆Do not mount the inverter and the battery pack in areas containing highly flammable
materials or gases.
3
To Next Page
Loading...