CT RAD micro Series - Contents

ELECTRONIC SIGHTS
3
MANUAL ON/OFF
• Power On: With a battery installed, the
CT RAD™ micro Series Sight will power on and
adjust brightness automatically.
• Storage: When not in use, it is recommended to
store the CT RAD™ micro Series Sight with the
protective cover installed. This will maximize
battery life.
WARNING: UNLOAD YOUR FIREARM BEFORE INSTALLING OR REMOVING YOUR CRIMSON
TRACE® SIGHT. FIRST REMOVE THE MAGAZINE FROM THE FIREARM. SECOND, VISUALLY
AND MANUALLY CHECK AND CLEAR THE CHAMBER AND ACTION OF AMMUNITION.
CONTENTS
A. PROTECTIVE COVER
B. MOUNTING SCREWS (2X) M4 X 8
C. MOUNTING SCREWS (2X) #6-32 X 0.5
D. MOUNTING SCREWS (2X) M3X8
E. CT RAD™ MICRO SERIES SIGHT
F. CR1632 LITHIUM BATTERY
F
A
B
C
E
D