CTC Union DIY I3 - Chapter 6 OPERATION; Suggested Operating & Storage Environment; Technical Parameters

ZHUHAI CTC ELECTRONIC CO. LTD DIY PRINTER INSTALLATION AND OPERATION INSTRUCTION
28
Chapter 6 OPERATION
6.1 Suggested Operating & Storage Environment
Operating Environment: Well-ventilated, dust-free area; temperature 15°C-35°C;
humidity 20%-80% (no condensation).
Storage Environment: Temperature 0°C-40°C; humidity 10%-80% (no
condensation); clean environment without corrosive gas.
6.2 Technical Parameters
Buildable Dimensions: Maximum 200mm*200mm*180mm, smaller dimensions
are suggested.
Input Voltage: AC 110V-220V
Supporting Operating System: Windows 7 / 8 (32-bit / 64-bit)
Software: Cura
Printing Material: PLA
Material Property: PLA special for 3D printing (exclusive formulation)
Layer Accuracy: 0.1mm-0.5mm