REPLACEMENT BASKET ROTATION
ACTUATOR
OPEN THE ELECTRIC BOX ON THE BASKET,DISCONNECT THE ACTUATOR
AND REMOVE THE SCREWS ON THE BASKET SUPPORT TO REMOVE
THE ACTUATOR
AFTER THE CHANGE ADJUST THE POTENTIOMETER(CORRECT
VALUE:MIDDLE OF THE ELECTRIC RANGE.
BE CAREFUL NOT TO MISS THE CALIBRATION DURING RELOCATION
MAKE THE RESET
TO MAKE THE RESET FOLLOW THE RELATIN CHAPTER
WHO CAN PERFORM THE MAINTENANCE:
TOOLS:3mm key
WARNING:MAKE THE MAINTENANCE WITH THE ENGINE AND PTO OFF
pag 9
To Next Page
Loading...
