Z45X SERIES INDUSTRIAL CONTROLLERS - DECEMBER 23, 2020 24
Tools
The Z4550 comes standard with two tools installed.
Flash Update Client
The Flash Update client provides a mechanism to load over-the-air firmware update
and to enable additional applications on the controller. The Flash Update client can be
configured for periodic (daily/weekly/monthly) updates, or to perform the updates ad-
hoc when the user initiates an update request.
Backup and Restore
Backup and Restore works in conjunction with a USB stick inserted in the type A USB
connector. The USB stick should be formatted as FAT32. Types of backups possible
include:
Automation Control
Navigation Services
Entire System
Product Branding
Logs (WAN and System logs)
In addition to a restore option for each backup categories listed above, an additional
type of restore allows update installer files to be applied to a Controller via the USB
drive.
Applications
The Z4550 comes standard with the Automation-Light application installed. Automation-
Lite is a scaled back version of the complete Automation application, which can be
licensed from Ctek. See Application Note APN008 for details on the Automation
application.
To Previous Page
Loading...
Need help?
General