CTM HS-328 - Adjustments and Features

Instruction BookletHS-328
1.Turn the Cap (I) outward upward to disengage the pin.
2.Simultaneously, adjust the tiller fore-and-aft to the most comfortable angle. Release Cap
(I) and ensure the pin is fully engaged to lock the tiller in position.
1.Lift the Lever (J) upward to disengage the pin.
2.Simultaneously, rotate Seat (K) to the most comfortable angle.
To lock the seat in position by Releasing Lever (J) and ensure the pin is fully engaged.
If scooter's circuit system malfunctions or over loaded, the circuit breaker will trip and
automatically shut down the power to ensure driver's safety. After shut down the power,
press button of Circuit Breaker (B) to reactive the circuit system.
The scooter can be pushed, when the Free-Wheeling Lever (L) is disengaged.
To engage the Free-Wheeling Lever (L) - Pull up the free-wheeling lever.
To disengage the Free-Wheeling Lever (L) - Push down the free-wheeling lever.
7
Tiller Angle Adjustment :
Seat Rotation Adjustment :
Figure 7
(J)
(K)
Figure 6
(I)
Circuit Breaker :
Free-Wheeling Lever :
Figure 9
(L)
Figure 8
(B)