Ctouch CLS-86UHD User Manual

Laser Sky | User Manual 1079V180912
The power to engage
DISPLAY MENU
ADJUSTING SETTING MENU
Setting
Source Auto Switch Select On to automatically recognition source
Auto Hide Float Bar When this setting is On, if there is no operation in about 8 seconds, the float menu will disappear automatically.
Color Range Select color range (Only for HDMI mode)
HDMI EDID Ver. Select HDMI EDID Ver.
HDMI_ARC Select On to turn on enable HDMI_ARC
Menu Timeout Select OSD menu display time
Off Timer Set Off Timer to switch the CTOUCH to standby at a specified time
On Timer Set On Timer to turn on the CTOUCH automatically to source at a certain time
Sleep Time Set the duration of time until the monitor automatically goes into Standby mode [Off] / [10 Minutes] / [20 Minutes] / [30 Minutes] / [60 Minutes] /
[90 Minutes] / [120 Minutes] / [180 Minutes] / [240 Minutes]
Set Password Password settings
Change Wallpaper Set wallpaper
Change No Input Wallpaper Set no input wallpaper
Home Option Set the behavior of Home button
Edit Input
Source Select the input source you want to label
Label Edit the label of the selected input source
Reset Reset labels to defaults
TouchOut1 To
TouchOut is there to define which touch signal output belongs to which input. E.g. if TouchOut1 is set to HDMI1 it means the touch signal output
from TouchOut1 belongs to the input from HDMI1. When both ports are connected TouchOut2 has priority by default.
TouchOut2 To
COS OTA Update Update COS system by OTA.
Set Display Menu to Default Reset all Display Menu settings to factory defaults

Ctouch CLS-86UHD Specifications

General

Brand	Ctouch
Model	CLS-86UHD
Category	Monitor
Language	English