Need help?Do you have a question about the Ctouch Canvas and is the answer not in the manual?
General| Panel type | TFT |
|---|---|
| Color depth | 8 bit |
| Pixel pitch | 0.42975 x 0.42975 mm |
| Screen shape | Flat |
| Response time | 8 ms |
| Backlight type | Direct LED |
| Display diagonal | 74.54 \ |
| Surface hardness | Mhos 7 |
| Touch technology | Multi-touch |
| Display brightness | 350 cd/m² |
| Display glass type | Tempered glass |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Maximum refresh rate | 60 Hz |
| Contrast ratio (typical) | 4000:1 |
| Display number of colors | 1.073 billion colors |
| Display diagonal (metric) | 189.3 cm |
| Number of simultaneous touchpoints | 20 |
| Certification | WEEE |
| Product color | Black, Grey |
| Glass thickness | 4 mm |
| Cables included | AC, HDMI, USB, USB Type-C |
| Audio input | Mini Jack |
| USB hub version | 3.2 Gen 2 (3.1 Gen 2) |
| DisplayPort version | 1.2 |
| HDMI ports quantity | 3 |
| USB upstream port type | USB Type-C |
| USB Type-A downstream ports quantity | 5 |
| AC input voltage | 100 - 240 V |
| Power supply type | AC |
| AC input frequency | 50 / 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 120 W |
| Panel mounting interface | 800 x 600 mm |
| On Screen Display (OSD) languages | DEU, DUT, ENG |
| Package depth | 225 mm |
| Package width | 1873 mm |
| Package height | 1186 mm |
| Package weight | 72600 g |
| Placement supported | Horizontal |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 2 |
| Built-in camera | No |
| RMS rated power | 80 W |
| Sustainability certificates | CE, RoHS |
Weight and Dimensions| Depth (without stand) | 104 mm |
|---|---|
| Width (without stand) | 1727 mm |
| Height (without stand) | 1020 mm |
| Weight (without stand) | 61700 g |
Keep candles and open flames away from the display to prevent fire spread.
Incorrect fitting can cause equipment fall, injury, and product damage; professional installation is recommended.
Ensure the display is off, check plugs, and insert them securely to avoid image or color problems.
Step-by-step guide for turning the CTOUCH interactive display on, off, and into standby mode.
Guidelines for safely connecting external devices to the CTOUCH display, including checking cables.
Connect the display to the internet via LAN cable and access the settings menu for initial configuration.
Access and modify default settings using the default pincode '0000', including language and other preferences.
Instructions for mounting BRIX, installing OPS PC, and setting up whiteboard and sharing software.
Solutions for problems where the remote control does not operate, including battery checks.
Troubleshooting steps for issues like no picture, poor picture, no sound, or audio noise.
To Next Page
