Need help?Do you have a question about the Ctronics CT-S20-J and is the answer not in the manual?
General| Connectivity | 2.4GHz WiFi |
|---|---|
| Storage | MicroSD card (up to 128GB) |
| Motion Detection | Yes |
| Power Supply | 5V/1A |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
Connect camera to Wi-Fi using sound configuration. Ensure 2.4G Wi-Fi compatibility and adjust mobile phone volume.
Details the various functions available on the camera interface, including battery status, image settings, and recording.
Configure alarm settings, push notifications, PIR sensitivity, and humanoid detection for enhanced security.
Guides on viewing recorded videos from SD card or local storage, and downloading them to a mobile device.
Troubleshooting why the camera shuts down after the power button is pressed, related to battery charge.
Resolving issues where the camera fails to match the network, checking placement, volume, and password.
Reducing false alarms from environmental factors by adjusting PIR and humanoid alarm settings to save power.
Troubleshooting inability to view video, checking SD card installation, formatting, and time zone settings.
Ensuring consistent recording time by setting device and phone time zones, and checking daylight saving.
Guidance on installing the solar panel in a different location if the camera's installation spot is not well-lit.
Addressing mobile app connection problems, picture freezing, or slow buffering due to Wi-Fi signal strength.
How to set the alarm recording time to 30 seconds in the alarm settings for longer event capture.
Information on deleting video files from the SD card; single file deletion is not supported, format card instead.
Procedure to reset the camera to factory default and restore the password to 'admin' if forgotten.
To Next Page
