EasyManua.ls Logo

CTS HES-3109 User Manual

CTS HES-3109
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
HES-3109 SERIES
9 PORTS 10/100/1000BASE-T MANAGEMENT ETHERNET
SWITCH
8 PORTS 10/100/1000BASE-T MANAGEMENT ETHERNET
SWITCH WITH 1 PORT 1000BASE-X UPLINK OR 1 PORT
100/1000BASE-X UPLINK
8 PORTS 10/100/1000BASE-T MANAGEMENT ETHERNET
SWITCH WITH 1 PORT 1000BASE-X UPLINK OR 1 PORT
100/1000BASE-X UPLINK AND TV RF RECEIVER
8 PORTS 10/100/1000BASE-T MANAGEMENT ETHERNET
SWITCH WITH 1 PORT 1000BASE-X UPLINK OR 1 PORT
100/1000BASE-X UPLINK WITH BATTERY CHARGING
FUNCTION
8 PORTS 10/100/1000BASE-T MANAGEMENT ETHERNET
SWITCH WITH 1 PORT 1000BASE-X UPLINK OR 1 PORT
100/1000BASE-X UPLINK WITH BATTERY CHARGING
FUNCTION AND TV RF RECEIVER
Network Management
User’s Manual
Version 0.91
Question and Answer IconNeed help?

Do you have a question about the CTS HES-3109 and is the answer not in the manual?

CTS HES-3109 Specifications

General IconGeneral
BrandCTS
ModelHES-3109
CategoryNetwork Hardware
LanguageEnglish

Summary

Introduction to the Management Ethernet Switch

Interfaces Overview

Details physical ports and panel layouts for different switch models.

Management Preparations

Covers connecting the switch and assigning IP addresses for management.

LED Definitions

Explains the meaning of each LED indicator on the device.

Button Definitions

Describes the function of the device's buttons for operation.

Command Line Interface (CLI) Operations

Remote Console Access

Guides on accessing and managing the switch via Telnet.

CLI Navigation and Modes

Explains CLI modes, basic navigation, and general commands.

User and Privileged Mode Operations

Details commands available in User and Privileged modes.

Configuration Mode Overview

Explains how to enter and the purpose of configuration mode.

System Information Display

Details commands to display system status and hardware information.

Interface Configuration

Instructions for configuring network interfaces and ports.

IP Address Configuration

Steps to set up IP addresses, subnet masks, and DHCP.

QoS Configuration

Details on Quality of Service settings and queuing modes.

Security Settings

How to configure storm protection for network security.

VLAN Configuration

Instructions for creating and managing VLANs.

DHCP Auto-Provisioning Setup Guide

Setup Procedures

Outlines steps to set up the auto-provisioning environment.

Auto-Provisioning Process

Explains the device's auto-provisioning workflow.

Related product manuals