CTX Virtual Technologies VK200 KEYFOB - Connecting the VK200 KEYFOB via USB; USB Connection Procedure; Bluetooth Priority Over USB

49 pages

To Next Page

To Previous Page

5.2 CONNECTING VIA USB

This device is compatible with all USB HID capable

operating systems. USB HID connection allows plug-

n-play without installing a separate driver.

1. Connect VK200 KEYFOB

and host device using

supplied USB cable. Host device must support USB

HID. Note: Most Windows devices support USB HID.

2. Turn on VK200 KEYFOB

3. Display Screen of the VK200 will have the U

displayed. If no U is displayed please check the

connection.

BLUETOOTH PRIORITY OVER USB

Bluetooth has priority over USB. If Bluetooth is

connected and a U is displayed and ashing then

click FN and B or use the menu system to turn

Bluetooth off allowing USB HID to take over.