CTX Virtual Technologies VK200 KEYFOB - Sensitivity Settings Explained; Factory Reset Procedure

To Next Page

To Previous Page

The change in settings will be shown on the VK200

KEYFOB

screen. Sensitivity can also be adjusted

through the menu. Please see the menu system for

details on adjusting brightness using the menu.

Setting Number 1 Low Sensitivity - Should be used

for high light conditions.

Setting Number 2 Normal Sensitivity - Should be

used for normal lighting conditions.

Setting Number 3 High Sensitivity - Should be used

for dark painted nails where keystrokes are not being

detected.

RESETTING

If keystrokes are not recognized after adjusting

sensitivity to the highest setting, hold the on/off

button for 5 seconds while the unit is off or press

FN and M and select menu item Advanced then

choose the menu item “Fact Reset”. This restores

the sensitivity and all settings back to factory

default settings.