3
7. Do not connect with any other voltage or frequency beyond the range stated in the power
rating overlay on the rear cabinet. Please follow all warnings and instructions marked
on the product.
8. Unplug the monitor from the wall outlet before cleaning.
Do not use liquid, or aerosol cleaners. Use a lightly-damp
cloth to clean the exterior of the plastic cabinet.
9. As a safety feature, this product is equipped with a 3-wire grounding type plug pursuant
to the safety regulation stipulated by local safety authority. This plug will only fit into
a grounding-type power outlet. If a grounding-type power outlet is not available, contact
a electrician to install one(s). Do not attempt to cut off the grounding pin to fit into an
inappropriate power outlet. Choose a Tandem Blade attachment plug configuration
power cord for 230 VAC input. Due to the safety requirements of different areas, please
select a suitable power cord, as well as electric rating, according to the following rules:
A. Northern America area : Please select a UL listed and CSA certified power cord.
B. Germany : Please select a VDE certified power cord.
C. Nordic countries : Please select a power cord certified by SEMKO, NEMKO, DEMKO
or FIMKO.
D. The other areas : Please select a power cord suitable to the local power system and power
outlet.
Usually a suitable power cord is provided by the manufacturer, when this product is sold.
However, this product is sometimes resold or transported to another area operating
under frequency different power and safety requirements, so it is very important to pay
attention to the type of power cord being used.
The plug on the power cord is intended to serve as the disconnect device, the socket-
outlet shall be installed near the equipment and shall be easily accessible.
10.Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points, or short circuit parts that could result in fire or electric shock.
11.Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to service
personnel.
To Next Page
Loading...
