CTX CMS-3435 User Manual

Safe practices for handling components, servicing, and component replacement.

Precautions and measurement procedures for high voltage circuits.

Measures to limit and protect against X-radiation from the picture tube.

Procedure to check the operation of the high voltage hold down circuit.

Details on multiscan capabilities, resolution, compatibility, and input signals.

Detailed specs including picture tube, pitch, input signals, resolution, and environmental factors.

Power switch, power indicator, and analog/TTL indicator.

Brightness and Contrast controls for picture quality.

Auto switch and TTL/Analog input selection for monitor compatibility.

Describes H. Width, Manual, Text, and Color switches for display modes.

Visual representation of horizontal and vertical signal timing for various sync types.

Table of timing values for different display formats and sync polarities.

Explanation of the power supply circuitry, voltages, and regulation.

Details on signal input, preamplifiers, color mapping, and TTL/Analog processing.

Covers sync processing, frequency conversion, and deflection outputs.

Presettings for oscillation, position, retrace time, and linearity.

Details on signal processing for horizontal drive and output stages.

Explanation of vertical sync, oscillator, auto-sizing, and size controls.

Circuitry for controlling CRT gun bias, brightness, and sub-bright levels.

Procedures for adjusting power supply voltages.

Adjustments for H-Center, H-Hold, H-Frequency, and H-Width.

Adjustments for V-Size, V-Hold, V-Linearity, and V-Center.

Adjustments for bias, sub-bright, contrast, and sub-contrast.

Procedures for adjusting high voltage and X-ray protector settings.

Adjusting horizontal centering for different graphics modes.

Procedure to ensure equal spacing of blocks for vertical linearity.

Adjusting vertical size and screen height.

Adjusting side pincushion correction for various display modes.

Adjusting horizontal width of the picture.

Procedures for cut-off, white balance, brightness, and focus adjustments.

Introduction to fault finding procedures and helpful materials.

A step-by-step guide for diagnosing and resolving monitor issues.

Flowchart for diagnosing and troubleshooting the power board.

Flowchart for diagnosing and troubleshooting the deflection board.

Flowchart for diagnosing and troubleshooting video signal issues.

Diagrams showing components and connections on various PCBs.

Visual representation of the monitor's functional blocks and signal flow.

Visual breakdown of the monitor's components for assembly/disassembly.

Detailed list of parts with numbers, descriptions, and quantities.

List of transistors with part numbers and descriptions.

List of diodes and zener diodes with part numbers and descriptions.

List of ICs with part numbers and descriptions.

List of ICs and resistors with part numbers and descriptions.

List of resistors with part numbers and descriptions.

List of resistors with part numbers and descriptions.

List of resistors and variable resistors with part numbers and descriptions.

List of capacitors with part numbers and descriptions.

List of capacitors, coils, and transformers with part numbers and descriptions.

List of capacitors, coils, transformers, and assembly parts.

List of switches, connectors, miscellaneous items, and CRT parts.