5
ENERGY DECLARATION
Power Consumption (120/230Vac)
VESA Power-Management Proposal
This monitor is equipped with a function for saving energy which supports the VESA
Display Power Management Signaling (DPMS) standard. This means that the monitor
must be connected to a computer which supports VESA DPMS to fulfil the requirements
in the NUTEK specification 803299/94/96. Time settings are adjusted from the system
unit by software. From indicated inactivity to Power Saving Position A2 the total time
must not be set to more than 70 minutes.
According to TCO guidelines, the optimum TCO readings are measured when brightness and contrast are adjusted to
their center position.
VESA DPMS Standard
H.sync V. sync Video State
Off On Blank Stand-by
On Off Blank Suspend
Off Off Blank Off
NUTEK VESA state LED indicator Power Consumption
Normal operation On Green <100W
Power Saving Position A1 Stand-by Amber
≤15W
Power Saving Position A2 Off Amber
≤8W
To Next Page
Loading...
