Cub Cadet 1215 - Page 29

ATTACHING MOWER TO TRACTOR
■ ^NOTE
Figures 48 through 53 illustrate attaching the
mower deck to the tractor. The 38 inch deck is
shown, but is typical of both the 44 inch deck
and the 38 inch deck.
1. A ssemble the front hanger assembly to the trac¬
tor as shown in Figure 48.
Figure 48.
1. Hanger Rod
2. Hairpin Cotters and Flat Washers
3. Front Hanger Assembly
2. A ttach deck hangers and adjustable lift links
using hairpin cotters and flat washers as shown
in Figures 49 and 50.
2
/
Figure 49. Right Side of Deck
1. Deck Hanger
2. Hairpin Cotter and Fiat Washer
3. Adjustable Lift Link
Figure 50. Left Side of Deck
1. Hairpin Cotter and Flat Washer
2. Deck Hanger
3. Install spindle belt by slipping belt over electric
PTO pulley. (See Figure 51.)
Figure 51.
1. Electric PTO Pulley
2. Drive Belt
4. P u l l idler pulley away from the tractor and then
place drive belt behind it. Release idler pulley.
(See Figure 52.)
1 2
Figure 52.
1. Idler Pulley
2. Drive Belt