Cub Cadet 1215 User Manual

■ ^NOTE
In all cases the rear deck hangers should be
attached to the inside of the mower sup¬
port hangers on the tractor as shown in
Figure 50. Figure 52 illustrates the correct
deck connections to front and rear deck
hangers. Ensure that front and rear deck
hangers are installed onto deck as shown
in Figure 52.
REAR DECK HANGERS
FRONT FRONT DECK HANGERS
(38 inch Deck)
FRONT
(44 inch Deck)
Figure 52
30

Cub Cadet 1215 Specifications

Capacities

fuel tank capacity	3 gals
crankcase capacity	3 pints
transmission capacity	1-1/2 pints
transaxle capacity	2-3/4 pints

Transmission

gears	5 forward speeds and 1 reverse
forward speed	0 to 5.5 mph
reverse speed	0 to 2.35 mph

Engine Specifications

engine make and model	Briggs and Stratton
engine power	12 HP
cylinders	1
bore	3.44 in
stroke	3.06 in
displacement	28.40 cubic inches
low speed	1750 RPM
high idle speed	3400 RPM +-100

Electrical System

system voltage	12 volt neg. ground
alternator	16 amp
fuse	20 amp slow blow
headlights	GE 12 volt 1156

Tires and Dimensions

front tire size	15x6-6
rear tire size	20x10-8
wheelbase	45.0 in
length	68.50 in
turning radius	29.00 in