EasyManuals Logo

Cub Cadet 1525 User Manual

Cub Cadet 1525
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
31
SECTION 12: SPECIFICATIONS
1525 1527
Capacities
Fuel Tank
3 gallons (11.4 liters) 3 gallons (11.4 liters)
Crankcase (approximately)
1.8 quarts / 57.6 oz. (1.7 liters) 1.8 quarts / 57.6 oz. (1.7 liters)
Transmission Case (approximately)
4.9 pints / 78.8 oz. (2.3 liters) 4.9 pints / 78.8 oz. (2.3 liters)
Hydrostatic Transmission
Make and Model
Hydro-Gear 311-0710 Hydro-Gear 311-0710
Gear Ratio
22.2:1 22.2:1
Forward Speed
0 m.p.h. - 5.5 m.p.h. 0 m.p.h. - 5.5 m.p.h.
Reverse Speed
0 m.p.h. - 2.5 m.p.h. 0 m.p.h. - 2.5 m.p.h.
Engine (Air-cooled, 4-cycle, Gasoline, OHV)
Make and Model
Kawasaki FH430V Kawasaki FH500V
Cylinders
Twin Twin
Bore
2.56 in. (65 mm) 2.68 in. (68 mm)
Stroke
2.56 in. (65 mm) 2.68 in. (68 mm)
Displacement
26.3 cu. in. (431 mL) 30.15 cu. in. (494 mL)
Maximum Power @3600 RPM
15 HP (11.2 kW) 17 HP (12.7 kW)
Maximum Torque @2400 RPM
23.6 lbs. ft. (32 Nm) 25.1 lbs. ft. (34 Nm)
Compression Ratio
8:5:1 8:5:1
Engine Speed (governed)
Low Speed
1200 RPM 1200 RPM
High Speed (no load)
3500 RPM (± 100 RPM) 3500 RPM (± 100 RPM)
Spark Plug Gap
.030 in. (.75 mm) .030 in. (.75 mm)
Electrical System
System Voltage
12-volt Negative Ground 12-volt Negative Ground
Battery
270 CCA (sealed) 270 CCA (sealed)
Alternator
13 Amp Regulated 13 Amp Regulated
Fuse (automotive type)
20 Amp 20 Amp
Headlights
Incandescent Incandescent
Brakes
Single Disc (Dry) Single Disc (Dry)
Turf Tires
Front (inches)
15 x 6 x 6 15 x 6 x 6
Rear (inches)
20 x 9 x 8 20 x 9 x 8
Dimensions
Wheelbase
47 in. (119.4 cm) 47 in. (119.4 cm)
Length, over all
68 in. (172.7 cm) 68 in. (172.7 cm)
Width, over all (w/ mower deck - chute up)
45 in. (114.3 cm) 45 in. (114.3 cm)
Height, over all (to top of steering wheel)
43 in. (109.2 cm) 43 in. (109.2 cm)
Ground Clearance
6 in. (15.2 cm) 6 in. (15.2 cm)
Turning Radius
18 in. (46 cm) 18 in. (46 cm)
Weight (approximate)
502 lb (225.9 kg) 504 lb (226.8 kg)

Other manuals for Cub Cadet 1525

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet 1525 and is the answer not in the manual?

Cub Cadet 1525 Specifications

General IconGeneral
Engine Power15 HP
EngineKohler Command
Transmission TypeHydrostatic
DriveRear-wheel drive
Cutting Width42 inches
Cutting Height1.5 - 4 inches
Blades2
Deck MaterialSteel
Engine Type4-Cycle, Single Cylinder, OHV
Speed0 to 5.2 mph
Warranty2 year limited

Related product manuals