Cub Cadet 1811 User Manual

TO THE OWNER
Assembled in this manual are operation, lubrication,
and maintenance instructions for the Cub Cadet ^806,
1810, 1811, and 1812 Tractors. The material has
been prepared in detail to help you better understand
the correct care and efficient operation of your tractor.
Before you operate the tractor, study this manual
carefully. Additional copies may be ordered from your
dealer at a nominal price.
Your local authorized dealer is interested in the per¬
formance you receive from your tractor. He has
factory-trained servicemen. Informed in the latest
method of servicing tractors, modern tools, and
original-equipment service parts which assure proper
fit and good performance.
A CAUTION
DO NOT TOW Tractor Models 1810, 1811,
or 1812. Towing or pushing the tractor for
more than a few feet may damage the
hydrostatic drive unit.
The Cub Cadet WO, 1811, and 1812 Tractors have a
hydrostatic drive unit available and will require
minimum service if recommended operation and
maintenance procedures are followed.
To obtain top performance and assure economical
operation the tractor should be inspected, depending
on its use, periodically, or at least once a year, by your
authorized dealer.
When in need of parts, always specify the model,
chassis, and engine serial numbers, including the
prefix and suffix letters. Write these serial numbers in
the space provided on this page.
Should you have difficulties with the unit, consult your
authorized dealer. UNDER NO CIRCUMSTANCES
SHOULD YOU ATTEMPT TO SERVICE THESE
UNITS YOURSELF. Only your dealer is authorized to
repair or replace units on this drive under the terms of
the warranty. Should you desire additional information
not found in this manual, contact your authorized Cub
Cadet dealer.
SERIAL NUMBER LOCATION
NOTE
grille end of the tractor; to REAR the drawbar
end.
LEFT and RIGHT indicate the left and right
sides of the tractor when facing forward in the Chassis serial number plate is located near left rear
driver's seat. Reference to FRONT indicates fender. (See Figure 1.)
CHASSIS SERIAL NUMBER
Figure 1
Figure 2
MODEl_
DELIVERY DATE
6

Cub Cadet 1811 Specifications

General

Drive	2WD
Steering	Manual
Transmission	Hydrostatic
Brakes	Mechanical
Front Tire Size	16x6.50-8
Rear Tire Size	23x10.50-12
Cutting Height	1-4 inches