Cub Cadet 1863 User Manual

MAINTENANCE CHART
Operation to
be performed
Check engine oil level
Fill fuel tank
Change engine oil
& oil filter
Check transmission
oil level
Replace transmission
oil filter
Reoil & clean
foam air precleaner
Check battery
electrolyte level
Lubricate steering
knuckles (2) &
steering arm
Retorque rear
wheel lug nuts
Lubricate brake shaft
Grease lift shaft
Clean cooling fins &
external surfaces
Check spark plugs
Lubricate speed con¬
trol linkage cam plates
Lubricate drive shaft
Steering gear housing
(1863 only)
Grease front wheel
bearings
Drain fuel
Pivot bar adjustment
bolts
Before
each use
10 hours
or once
a month
More often
under dirty
conditions
X
30 hours
three times
a season
50 hours
or twice
a season
100 hours
or
yearly
After first
Every 100
50 hours
hours there¬
X
after
NOTE
Maintenance information for operational equipment may be found in the manual which is included with the
specific piece of optional equipment.
32

Cub Cadet 1863 Specifications

General

Engine Power	18 hp
Transmission	Hydrostatic
Cylinders	2
Drive	2WD
Number of speeds	Infinite
Axles	2
Front tire size	16x6.5-8
Rear tire size	23x10.5-12
Cutting Height	1.5-4 inches
Deck Material	Steel
Engine	Kohler Command
Brakes	Disc