Cub Cadet 195 cc OHV User Manual

Operation
5
9
Pre-Operation Check
The engine is shipped without gasoline or oil in the engine. See
the Set-Up Section of this manual for instructions on adding oil
and gasoline.
Starting the Engine
WARNING: Always keep hands and feet clear of
equipment moving parts. Do not use a pressurized
starting fluid. Vapors are flammable.
1. Standing behind the mower, depress the blade control
handle and hold it against the upper handle. See Figure 5-1.
2. Pull the starter grip lightly until resistance is felt, then pull
rapidly to overcome compression, prevent kickback and
start engine. Repeat if necessary.
IMPORTANT: Do not allow the starter grip to snap back
against the engine. Return it gently to prevent damage to
the starter.
Stopping Engine
1. Release blade control or turn off the engine switch (if
equipped).
1
2
Figure 5-1

Cub Cadet 195 cc OHV Specifications

General

Brand	Cub Cadet
Model	195 cc OHV
Category	Engine
Language	English