Cub Cadet 2072 User Manual

2. the PTO is in the "OFF" position, 3. the operator
is seated.
Figure 5
1. Turning Brake Pedals
2. Turning Brake Pedal Lock
G. FRONT POWER TAKE-OFF CONTROL
SWITCH
The power take-off (PTO) control switch, which is
located on the left side of the instrument panel (see
Figure 3). operates an electric clutch. This electric
clutch controls the engagement ("ON") or disengage¬
ment ("OFF") of the front PTO.
H. INTERLOCK SAFETY SWITCHES
A CAUTION
The engine will not start unless:
1 . The single brake pedal is depressed.
2. The PTO switch is in the "OFF" posi¬
tion.
3 . The operator is seated.
When using PTO operated equipment, the
operator must remain in tractor seat at all
times. If operator should leave tractor seat
without turning off the PTO switch the PTO
will automatically disengage.
Interlock safety switches are activated by the single
brake pedal, the PTO switch located on the control
panel, and a switch located underneath the operator’s
seat.
The interlock safety switches, activated by the brake
pedal, PTO switch and seat switch serve to prevent
starting the engine accidentally. The engine will not
start unless: 1. the single brake pedal Is depressed,
I. HYDRAULIC LIFT CONTROL LEVER
■ i^NOTE
The engine must be running In order to
operate the hydraulic lift.
The hydraulic lift control lever controls the raising and
lowering of a nrowing deck, if installed (see Figure 6).
The control lever is spring loaded. To raise the
equipment move the lever back toward the tractor
seat. To lower the equipment move the lever for¬
ward.
J. LIFT HEIGHT INDICATOR
The lift height indicator will indicate the height of deck
attachment when installed. (See Figure 7.)
INDICATOR
Figure 7
8

Cub Cadet 2072 Specifications

General

Brand	Cub Cadet
Model	2072
Category	Tractor
Language	English