8-9 Periodic Maintenance and Adjustment
To Install
1. Place the console in its original position.
2. Install the parking brake lever boot.
3. Install the seats.
CAUTION:
When installing the console, be sure not
to pinch the cables or wires.
Make sure that the groove at the bottom
of the parking brake lever boot and the
drive select lever boot fits securely
around the edge of the hole in the
console.
EFI system
An EFI engine is completely different from an
engine which uses a carburetor, it consists of
ECU, EFI-cables, sensors, actuators and
other advanced components.
Refer to the following pictures:
1. Oxygen sensor
2. Exhaust Pipe
To Next Page
Loading...
Need help?
General