Control Functions 4-11
WARNING
POTENTIAL HAZARD
Changing from 2WD to 4WD or from
4WD to 4W
D-LOCK (“DIFF.LOCK”), or
vice-versa while the vehicle is moving .
WHAT CAN HAPPEN
The vehicle handles differently in 4WD
than in 2WD and in 2WD-LOCK in some
circumstances. Changing from 2WD to
4WD or from 2WD to 2WD–Differential
UNLOCK, or vice-versa while moving
may cause the vehicle to unexpectedly
handle differently. This could distract
the operator and increase the risk of
losing control and an accident.
HOW TO AVOID THE HAZARD
Always stop the vehicle before chang-
ing from 2WD to 4WD or from 2WDto
2WD–Differential UNLOCK.
On-Command four-
wheel-drive switch
“2WD/4WD”
1. Select lever
2. On-Command four –wheel-drive switch “2WD/4WD”
To change from 2WD to 4WD, stop the
vehicle, and then set the switch to
“4WD”.When the vehicle is in 4WD, the
4WD indicator will come on in the
multi-function meter unit display .To change
To Next Page
Loading...
Need help?
General